Rublet iPhone Case
- Prix à l'unité
- /Par
Rublet is a leather iPhone case built on a silicone frame. The sides and the buttons are wrapped in flexible silicone, the back is a stitched panel of full-grain leather. That combination is what lets it cover 17 models, from the iPhone 13 all the way to the 17 Pro Max, and it is MagSafe compatible.
Leather and Silicone iPhone Case Features
Silicone frame, leather back
The frame around Rublet is silicone and the back panel is
leather, stitched around its edge onto the shell. The silicone gives when you
put the phone on and take it off, so nothing has to be forced, and the leather is what your palm
actually rests against.
Buttons stay covered and still click
The volume and side buttons sit under molded silicone covers rather than in
open cutouts. Nothing reaches the bare button, which is the part most exposed to grit in a
pocket, and you keep the click: you press the cover and feel the button underneath.
MagSafe compatible
Rublet works with MagSafe. It drops onto a wireless charging stand and MagSafe
accessories snap to the back. Add the Magsafe Card
Holder and 3 cards ride behind the phone.
Raised edges front and back
The front lip stands above the glass, so a phone left face down rests on the
case rather than on the screen. The camera housing is recessed the same way, which is the corner
that meets the table first when a phone slides off a car seat.
Rublet iPhone Case Material and Fit
Rublet comes in brown and black, both on a black silicone shell. The leather panel is never sanded down, so each one carries the grain of the hide it was cut from, with contrast stitching running around the panel and the embossed salamander at the center. The leather ages the way your hand uses it: the first months mark the panel, then it darkens and starts to shine.
Full-grain leather: the topmost, densest-fibered layer of the hide, its surface never sanded or thinned. Over the years it darkens rather than wears out, and the small scratches of daily use largely disappear when you rub them with a finger.
| Leather | Full-grain calfskin back panel, approx. 1.2-1.3 mm |
|---|---|
| Tanning | Semi-vegetable tanning method |
| Shell | Silicone frame, including molded button covers |
| MagSafe | Yes, charging and accessories |
| Models | iPhone 13, 13 Pro, 13 Pro Max, 14, 14 Pro, 14 Pro Max, 15, 15 Pro, 15 Pro Max, 16, 16 Plus, 16 Pro, 16 Pro Max, 17, 17 Air, 17 Pro, 17 Pro Max (17 in total) |
| Screen protection | Front edge raised above the glass |
| Card pocket | None |
| Colors | Brown, Black |
| Name embossing | Not available on this product |
| Production | Handmade |
What Rublet Does
- Phone: one of 17 models, iPhone 13 through 17 Pro Max, cut to that model
- Buttons: covered by silicone, the click stays
- MagSafe: wireless charging and MagSafe accessories both work
- Screen and camera: protected by raised edges
- Cards: none; a separate MagSafe card holder is needed
An honest limit: Rublet is not a slim case. A silicone shell and a leather panel are two layers, and two layers add real thickness; the phone sits fuller in the hand and in a shirt pocket. Plenty of people buy it for exactly that reason, but if you are chasing the thinnest possible profile, this is the wrong case, and the all-leather iPhone Case is closer to what you want. There is also no card pocket: the leather panel is a flat surface, not a sleeve. And the panel will scratch in the first months. Rubbing a mark with a fingertip closes most of them, but a leather back that stays untouched does not exist.
How to Pair Rublet
- To carry cards: the Magsafe Card Holder snaps onto the back and holds 3 cards, which covers a coffee, a train and a door badge without a wallet in your pocket.
- To make it a set: the Airpods Pro Case uses the same leather, so the two darken together instead of drifting apart.
- The Semender pairing: on the days you carry a bag, Rublet sits well with Rootbag or Fieldbag.
Rublet iPhone Case Care
- The leather panel darkens and gains character over time. That is not a flaw, it is patina
- Wipe the leather with a dry cloth once a month and apply leather balm a few times a year
- The silicone frame can be cleaned with a damp cloth. Keep the water off the leather
- If it gets wet, let it dry on its own at room temperature. Radiators and hair dryers stiffen leather
Frequently Asked Questions
Which iPhone models does Rublet fit?
Seventeen models: 13, 13 Pro, 13 Pro Max, 14, 14 Pro, 14 Pro Max, 15, 15 Pro, 15 Pro Max, 16, 16 Plus, 16 Pro, 16 Pro Max, 17, 17 Air, 17 Pro and 17 Pro Max. You choose yours at checkout. It is the only case we make for the iPhone 17 series.
What is the difference between Rublet and the iPhone Case?
The frame. Rublet is built on a silicone shell with a stitched leather back, so the buttons stay covered, the case flexes when you put it on, and it goes up to the 17 Pro Max. The iPhone Case is leather on every surface including the sides, thinner and firmer, and it stops at the 16 Pro Max. Both are MagSafe compatible and both use the same hide.
Does MagSafe and wireless charging still work?
Yes. Rublet sits directly on a wireless charging stand, and MagSafe accessories hold onto the leather back. If you want your cards on the phone, the Magsafe Card Holder attaches the same way and takes 3.
Does Rublet have a card pocket?
No. The leather back is a flat panel stitched onto the shell, not a sleeve, so nothing slides in behind it. Cards go on the outside with the Magsafe Card Holder, which holds 3 and comes off when you want the phone slim again.
Does it make the phone bulky?
It adds noticeable thickness, yes, because a silicone shell and a leather panel are two separate layers. In the hand that reads as substantial rather than clumsy, and it is part of why the buttons and the camera sit so well protected. If a slim profile matters more to you than protection, the all-leather iPhone Case is the thinner one.
Will the leather panel scratch?
It will. A phone is handled all day, so the back panel is the fastest-aging piece of leather most people own. The first months mark it, then it darkens and the marks blend in; rubbing a fresh scratch with a fingertip closes most of it. If you want a surface that stays identical, leather is the wrong material.
Rublet protects a phone the way a case should, without making it look like it belongs to a piece of equipment.
- When will my product arrive, and which shipping company do you use?
- Once you place your order, your product will be specially crafted for you and shipped within 5-7 business days. During this process, you will be informed at every stage via email. Click here for more detailed information.
- All orders are shipped via FedEx, UPS, DHL
- What type of leather do you use?
- All products are handmade from full-grain calfskin leather produced in 100% environmentally friendly and sustainable manner.
- My order will be a gift, what should I do?
- You can send us the note you wish to include with your order by entering it in the "Add order note" field on the cart page.
- To enhance the gift experience, you can order products from our "Extraordinary Gift Experience" collection, which comes with a 🎁 Special Note and Sealed Wooden Gift Box.
- Do you accept cancellations and returns?
- Of course! However, as stated in our Refund Policy, personalized products (e.g., those with name embossing) cannot be canceled or returned. If your product does not have any personalization, you can return it within the legal period of 14 days.
- To request a cancellation, exchange, or return of your order, you can contact us by clicking here.
- How can I personalize my order?
- On the product page, you can enter the letters (Max 18 characters) you wish to have debossed on your product in the designated field.
- Only 26 alphabet letters (A to Z) can be debossed.
- Where can I see the dimensions of the products?
- You can view the dimensions of the products by clicking the "Size Guide" button on the product page:

- Additionally, you can review all the features of the product in detail by clicking the "Description" button:

- We would like to place a bulk order for our company. What should we do?
- For products and benefits tailored to your corporate orders, please send an email to contact@semender.info

- Names could be debossed on the product.
- Please add your text to the "Customization Request" field.
- Your personalization will look like the debossing above (size & font).
- The text must be 18 characters max. Please double-check your spelling before adding it to the cart.
- Note: Debossed items cannot be accepted for return.
- Shipping is free for all orders.
- Your order will be shipped in 5-7 business days.
- All orders will be delivered via UPS, Fedex or DHL.
- You can securely make your payment by debit/credit card.
- Your payment information is protected by stripe and Shopify.
- You will be informed about your orders via e-mails. Click here for more information
Ajouter un produit à votre panier
For Premium Phone Owners
Premium Phone Case 🙃
Place your order👇🏽
For Premium Phone Owners
Premium Phone Case 🙃
Place your order👇🏽
Wraps Your Phone Completely
Your iPhone is safe 👍🏽
Wraps Your Phone Completely
Your iPhone is safe 👍🏽
Maximum Security, Maximum Comfort
Silicone edges enhance phone security and maximize ease of use!
Maximum Security, Maximum Comfort
Silicone edges enhance phone security and maximize ease of use!
Completely Handmade for You
& Your Loved Ones
Special products are handcrafted for you by skilled craftsmen from sustainable leather.
Each Package is a gift
We understand very well the value of you and your loved ones. That's why all orders are prepared with the utmost care as a gift.